Asbestos India

NR or Natural Rubber Poly-isoprene is derived from latex liquid extracted from rubber trees. Originally cultivated in the Amazon region, it is now cultivated extensively in South East Asia, Africa and India. This rubber has excellent mechanical properties, low compression set and high resilience. It also has excellent dynamic and rebound properties. The operating temperature range is from -50° C to + 90° C. It is available in a wide range of hardness from 30° to 80° Shore A. Many of them have good resistance to acids, alkalis and salts.

It is not recommended for use in areas where it could come in contact with oils and hydrocarbons. They are special purpose high abrasion resistant rubber sheet, made from premium quality dry Natural Rubber with outstanding resistance to cut, tear and abrasion used for anti-abrasion rubber linings for material handling equipment in mines.

Applications:

• Used as skirt-board sheets, bridge bearing pads, shot blasting sheets, Chute Lining, High Tensile Tan Gum sheets and commercial sheets with & without cotton insertion etc.

We are one of the leading distributors and manufacturers of Styrene-butadiene rubber. A polymer used in the manufacture of expanded rubber. It is very economical and possesses no unique chemical resistance properties. SBR rubber can be compounded to provide very fine abrasion, wear, and tensile qualities. SBR can be readily substituted for natural rubber in many applications with significant cost savings. Resilience is about the same as natural rubber.

Silicone rubber is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used with high- pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat (dry air), at +200C intermittent. It remains flexible at low temperatures of -70C and it is also resistant to ultra-violent light, Ozone and weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.

Additional Information:

• Item Code: 4006
• Production Capacity: 1000
• Delivery Time: 1 day
• Packaging Details: Sheet type

Nitrile rubber or acrylonitrile butadiene rubber is a co-polymer of butadiene and acrylonitrile. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexing, compression set and impermeability to gases. It has moderate aging properties and good adhesion to metal. Its recommended operating temperature range is -30° C to + 120° C.
It also displays a good resistance to inorganic chemical products except antioxidant agents and chlorine. It gives satisfactory resistance to general hydrocarbons. Due to its polar nature, we do not recommend its use with polar liquids like ketones, ethers and amines.

Additional Information:

• Item Code: s9
• Production Capacity: 1000
• Delivery Time: 1 day
• Packaging Details: roll type